Ergonomic Assessment of Risk Factors for Musculoskeletal Disorder in Selected Auto-repair Shops
Abstract
This study assessed risk factors for musculoskeletal disorder in auto repair shop by analyzing and assessing typical auto mechanic daily tasks using ergonomic assessment tools with consideration to risk factors such as awkward postures, high hand force and repetitive motion.. Questionnaire and physical measurements were employed for data collection from 11 auto mechanics, ages ranging between 15 to 51 years. Video camera was used to take snap shots of auto mechanics while working while video footages were used to aid the development of hierarchical task analysis diagram. A rapid upper limb assessment of the subjects for 23 auto mechanic tasks was conducted. The height and weight of subject including the weights of objects were inputted to the 3-Dimensional Static Strength Prediction Program for low back compression analysis. Results showed that 19 tasks of the 23 tasks assessed had very high risk ratings of 7. Lifting tasks 4, 6, 8 and 10 violated ergonomic criteria for all modeled postures. Extreme stoop lift posture yielded the highest low back compression forces increasing risks for low back pain. This work has shown that auto mechanics are at risk of Musculoskeletal Disorder, and low back compression analysis violated ergonomic criteria thus making auto mechanics susceptible to low back pain. There is need to ergonomically redesign the work process and system to prevent the situation getting worse. ©University of Ibadan
Full Text:
PDFReferences
Abd Rahman M.N, Azziz F.A, Yussuf R.M (2009). Investigation of Ergonomic Risk Factors in a Car Tyre Service Centre. Symposium on Advancements in Ergonomics and Safety, Persis. Anyaeche C. O. and Lawani O. O. , 2014, Development of Ergonomic Scorecard for Work Station Evaluation Nigerian Journal of Industrial System Studies Vol. 11, No 1, page 12-16 David G.C (2005). Ergonomic Methods for Assessing Exposure to Risk Factors for Work Related Musculoskeletal Disorders Occupational Medicine 2005;55:190–199. Retrieved September 10, 2014 from: http://occmed.oxfordjournals.org Dul J. and Weerdmeester B. (2001). Ergonomics for Beginners: A Quick Guide. Taylor and Francis. Hollnagel, E. (2012) Task Analysis: Why, What, And How in Handbook of Human Factors and Ergonomics, John Wiley & Sons, Inc. Hoboken Hughes, P. and Ferrett, E., 2015. Introduction to Health and Safety at Work: For the NEBOSH National General Certificate in Occupational Health and Safety. Routledge. Ishie P.E. (2015) Ergonomic Assessment of Risk Factors for Musculoskeletal Disorder in Auto-Repair Shop. Industrial and Production Engineering, University of Ibadan.xiii+67 Khan A. A., Inam S., Idrees M., Dad A., Gul K. and Akbar H. (2010). Effect of automobile workshop on the health status of automechanics in N. W. F. P., Pakistan African Journal of Environmental Science and Technology Vol. 4(4), pp. 192-200, April 2010. Available online at http://www.academicjournals.org/AJEST Lndaua, K.; Rohmert, W. and Brauchler, R. (2000). Task analysis: Part I - Guidelines for the practitioner in Ergonomics Guidelines and Problem Solving. Elsevier, Oxford Mukhopadhyay, P., Jhodkar, D. and Kumar, P., 2015. Ergonomic risk factors in bicycle repairing units at Jabalpur. Work, 51(2), pp.245-254. Norman R. and Wells R. (1998). Ergonomic Interventions for Reducing Musculoskeletal Disorders: An Overview, Related Issues and Future Directions. Pourmahabadian M. and Azam K. (2006) Evaluation of risk factors associated with work related musculoskeletal disorders of upper limbs extremity among press workers. Pakistan Journal of Medical Science Vol. 22 No. 4 Rogers, M. L. (2011). Identifying and Evaluating Risk Factors for Musculoskeletal Disorders in Equine Veterinary Work. Industrial Engineering, Engineering. North Carolina State University Sara C. White, 2013, Prevalence and Risk Factors Associated with Musculoskeletal Discomfort in Spay and Neuter Veterinarians, Animals 2013, 3(1), 85-108; Smith, C.K. and Williams, J., 2014. Work related injuries in Washington State's Trucking Industry, by industry sector and occupation. Accident Analysis & Prevention, 65, pp.63-71. The University of Michigan Centre for Ergonomics (2014). 3-D Static Strength Prediction Program Version 6.0.6 the University of Michigan. Retrieved 16th January 2015 from http://www.umichergo.org. Tompa, E., de Boer, H., Macdonald, S., Alamgir, H., Koehoorn, M. and Guzman, J., 2016. Stakeholders’ Perspectives About and Priorities for Economic Evaluation of Health and Safety Programs in Healthcare. Workplace health & safety, 64(4), pp.163-174. Wiggermann, N., 2015. Biomechanical Evaluation of a Bed Feature to Assist in Turning and Laterally Repositioning Patients. Human Factors: The Journal of the Human Factors and Ergonomics
Society, p.0018720815612625. Worksafe Victoria (2004). Guide to Automotive Workshop Safety-Fix the Risk in Abd Rahman M.N, Azziz F.A, Yussuf R.M (2009). Investigation of Ergonomic Risk Factors in a Car Tyre Service Centre. Symposium on Advancements in Ergonomics and Safety, Persis. Yang, H., Haldeman, S., Nakata, A., Choi, B., Delp, L. and Baker, D., 2015. Work-related risk factors for neck pain in the US working population. Spine, 40(3), pp.184-192. Zhang, Y., Punnett, L., McEnany, G.P. and Gore, R., 2016. Contributing influences of work environment on sleep quantity and quality of nursing assistants in long-term care facilities: A cross-sectional study. Geriatric Nursing, 37(1), pp.13-18.